2022 Topcon Construction GNSS & Network Solutions PN-A5
- Year 2022
- Make Topcon Construction
- Model GNSS & Network Solutions
2022 Topcon Construction GNSS & Network Solutions PN-A5
Pin-based, semi-hemispherical ground plane GNSS antennaThe PN-A5 antenna combines our TA-5 full-spectrum GNSS antenna element with an innovative convex impedance ground plane. The TA-5 antenna element utilizes an array of vertical dipoles to provide highly sensitive and stable full wave signal tracking for all existing and planned GNSS signals. Our new convex impedance ground plane provides improved multipath mitigation while providing minimum signal loss for satellites tracked to the horizon.
Features may include:- High-end geodetic antenna
- Topcon TA-5 vertical convex dipole antenna element for full-spectrum GNSS signal tracking
- Unique semi-hemispherical convex impedance ground plane
- Environmentally robust and sealed
- Minimized phase center offset variations in vertical within GNSS frequency band
- Improved tracking for low-elevation satellites for signal tracking from the local horizon to zenith
Electric
Electrical
Input Voltage Range: +3 to +12 VDC | Power Consumption: 100 mA
Operational
Operating Conditions
Operating Frequency Range: Lower: 1230 MHz±70 MHz / Higher: 1565 MHz±50 MHz | Gain at Zenith (90º): Lower: +6 dB (typical) / Upper: +4.7 dB (typical) | Gain Roll-Off (from Zenith to Horizon): Lower: -12 dB (typical) / Upper: -10 dB (typical) | LNA Gain: 43 dB (typical) | VSWR: 1.5 : 1
Operating Temperature, Maximum
50°C to +70°C | Storage Temperature: -55°C to +85°C
Performance
Noise Level
Noise Figure: 1.0 dB
Dimensions
Dimensions
Antenna: D: 15” (380 mm) H: 10.3” (262 mm) | Dome: D: 15” (380 mm) H: 11.5” (292 mm) | SCIGN dome: D: 16.3” (415 mm) H: 11.3” (287 mm)
Height
262 mm
Weights
Weight
6.7 kg
Features
Features
Humidity: 95%, Method 507.5 | Vibration Rating: Method 514.6, Broad band noise (random vibration), Category 4, table 514.6C-IV) | Shock Rating: Method 516.6. Procedure I - Functional Shock, Table 516.6-I, Fig. 516.6-8, accelerative forces up to 40g. | Dust/Water Protection: IEC 60529 IP6X / IEC 60529 IPX7 | Drop Test: IEC 60529 IP6X. Repeated drops from the height of 1 m on concrete surface. All sides – top, bottom | Connector: N-type