Current Manitou Group Machines Construction Telehandlers

2023 Manitou Group Construction Telehandlers MTA 8044 S3

2023 Manitou Group Construction Telehandlers MTA 8044 S3

Swipe to View More

  • Year 2023
  • Make Manitou Group
  • Model Construction Telehandlers
  • Engine norm: Tier 4 Final | Model: QSF 3.8
Shop Manitou Group Pre-Owned
Product Details Specifications Photos
2023 Manitou Group Construction Telehandlers MTA 8044 S3

2023 Manitou Group Construction Telehandlers MTA 8044 S3

  • Year 2023
  • Manufacturer Manitou Group
  • Model Name Construction Telehandlers
  • Trim Name MTA 8044 S3
  • Generic Type (Primary) General
  • Engine Manufacturer Cummins
  • Engine norm: Tier 4 Final | Model: QSF 3.8
  • Cylinder Liners 4 - 0.23 in³
  • Engine Power 89 kW
  • Engine Torque, Maximum 488 Nm

2023 Manitou Group Construction Telehandlers MTA 8044 S3

The MTA 8044 telehandler is capable of meeting construction on-site needs involving work heights of up to 13.4 m and handling capacities up to 3.5 t. A wide range of attachments and options are available making it possible to handle most applications on the job. Designed to stand the test of time, this telehandler is capable of quickly paying for itself. Equipped with a 115 hp John Deere Tier IV engine, you'll always have enough power whether you're stationary or on the move, laden or unladen. Either way you like, the torque is able to adapt to consume the least amount of fuel while providing you full-power peformance.

Engine

Engine Manufacturer Cummins
Engine norm: Tier 4 Final | Model: QSF 3.8
Cylinder Liners 4 - 0.23 in³
Engine Power 89 kW
Engine Torque, Maximum 488 Nm

Drivetrain

Transmission Type: Torque converter with powershift | Travel speed (laden): 20 mi/h
Gears Number of gears (forward / reverse): 3 / 3
Drive Control Single joystick with FNR

Brakes

Parking Brake SAHR
Brake System Type Service: Wet disc brakes

Wheels & Tires

Tires, Rear Specification 13 x 24 | Drive wheels: 2
Tires, Front Specification 13 x 24 | Drive wheels: 2

Operational

Operating Conditions Lifting: 11 s | Lowering: 8 s | Extension: 14s | Retraction: 12 s | Crowd: 7 s | Dump: 4 s

Hydraulics

Pump Type Gear pump
Hydraulic Flow 157 l/min
Maximum Pressure 3002 PSI

Chassis

Frame Type Frame levelling longitudinal +/- 10 °

Lights and Safety

Safety Features Safety cab homologation: ROPS/FOPS

Dimensions

Dimensions Max. outreach: 30 ft 6 in | Tilt-down angle 112 ° | Tilt-up angle 12 °
Lift Height Max: 44 ft
Overall Length to carriage: 19 ft 10 in | (with forks): 19 ft 10 in
Ground Clearance 16 in
Wheelbase 9 ft 11 in
Length to face of forks: 27 ft 6 in
Overall Width 8 ft 2 in | cab: 33 in
Overall Height 7 ft 8 in
Turning Radius External: 13 ft 9 in

Capacities

Cargo Capacity Max: 8001 lb
Oil capacity Engine oil: 4 US gal | Hydraulic oil: 45 US gal
Fuel Capacity 47 US gal | DEF tank capacity: 5 US gal

Weights

Weight Unladen (with forks): 23501 lb

Features

Features Axle Manufacturer: Dana

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.